3G/4G Solar long-standing GPS Tracking Device

  • 3G Solar long-standing trailer GPS Tracking Device

Hardware Platform: STM32L152RBT6
Model Number: HAWK II
Networking: 3G /4G LTE M1
Suitable Country: Global
Antenna: GPS outside, GSM outside.
MOQ: No limitation for sample order

INQUIRY

HAWK II has been designed for challenging conditions such as trailers, containers, boxcars, mining equipment, stationary and remote asset monitoring where permanent DC power supply is not always available. This robust all in one unit offers Solar panel, IP68 rating, large battery capacity, and the added advantage of a solar panel interface. The unit has been rigorously tested on the trailer and remote assets for than 4+ year with the design upgraded several times after the test results gained from real installation.

Telit xE910 3G module
● Quad Band GSM/GPRS,HSPA in 850/900/1700/1900/2100Mhz
● Transmit Protocol UDP, TCP, SMS
● HAWKII Protocol Provides a full event list to cover the different situations for the fleet industry.
Telit MC910 4G LTE module
Ublox M8N (72-channel u-blox M8 engine)
all GNSS compatible: GPS, SBAS, QZSS, GLONASS, BeiDou, Galileo

● Sensitivity: Tracking & Nav: –167 dBm
● Cold start: –148dBm | Hot start: –157dBm
● Position Accuracy: 2.0m CEP
● Acquisition: Cold starts: 26s | Aided starts: 2s | Reacquisition: 1s

● Sim Card Socket: Micro SIM Card
● Micro USB: For Firmware update, log capature by USB directly(no extra driver needed)
● Inner Memory: 16Mb SST flash loggin in blackspot 3G area
● Digital Input; 1 for DC detection, Plus 1 extra positive and negative trigger
● Digital Output: 2 for relay activation
● 1-wire: for temperature sensor(with3.3v and GND)
● Analog input: 1 for detecting voltage level

Hardware Specification:

      
ModuleTelit xE910/MC910GNSS Engine GPS/GLONASS/BEIDOU
GSM SpecFrequency3G/4G
GPS specFormatWGS-84
networkingWCDMA
NBIOT/LTE CAT1
Accuracy<2m (1σ)
Digital positive input ( + )1Digital negative input ( - )1
Digital Output ( - )2Analog input1
RS23211 Wire® iButton1
GPS AntennaoutsideGSM Antennaoutside
Battery15600mAhMemory16Mb (8000pcs data)
Power consumptionData Usage
USB Port( USB 2.0 HID) For firmware update and device parameter setting& debug with configurator
SIM SlotNano Card
input voltageDC 9 - 45V
Demension23*30*5CMWeight1.5KG

Firmware Features:

● 2 Operating Scenarios
● All in one with solar panel
● Tamper Resistant Enclosure
● Temperature Monitoring
● OTA firmware/Configuration
Industry level ULTRA LOW Consumption MCU

● Power consumption uA level
● Complete device consumption less than 1 mA in sleep mode
● Working mode standby consumption 25mA
● Peak value 50mA when unit is sending data to server

Solar Panel Output: Maximum 1000mA output

● Unit Power Consumption: Less than 1mA in longstandby mode
Sleep mode: 14mA
Standby mode: 25mA
● Power Supply Mode: DC, Solar panael or both
● Solar Panel Dimension: 310* 195mm

Smart Power Management

● 15000mAh Battery Built in
● Smart charging with both DC/Solar
● Power Supply Mode: DC, Solar panael or both

Power Supply: DC 9-45V

 

Your Name :

Your Email: